How to Replace Door Handles
The door handles of your home are an important part of the decor. upvc door handle www.repairmywindowsanddoors.co.uk can elevate your home's decor and bring your decor to the present.
Over time your knobs on your doors may begin to feel stiff, or break. These are signs it's time to change the knobs. This guide will help you select the right replacement door handle for your home.
Door Knobs
The handles on your doors will enhance the appearance of your home and allow you to shut and open them. They come in a variety of colors, finishes and styles that will complement your decor. If yours is beginning to show signs of wear or requires an upgrade You can replace them in a few easy steps.
You need to locate the spindle, or shaft through which the knob is attached to the door. Some have a small hole that you can insert an incredibly small screwdriver to loosen the set screws holding the knob in place. Some have a tiny slot, or hole, that you can use to press the spring-activated detent pin using flathead. This pin releases the latch mechanism and lets you to pull or push the knob.
Once you have the spindle, or shaft, in your hand, remove the old knob and replace it. Make sure to align it properly and then verify that the latch is working properly before tightening your new set screws.
After replacing the knob, put the latch rod in position over the hole in the door and interlock it with the rod mechanism on the second knob. Make sure the holes are lined up and then thread in the screws for the latch plate and tighten them.
Some people opt for a smooth or brushed finish for their door hardware to create a sleek, contemporary look that matches other furnishings in their homes. Others prefer a more rustic design that is a good match for spaces that are reminiscent of farmhouse. If you have someone in your family who has mobility issues, you may prefer a lever style or rim lock that require less pressure to operate.
While aesthetics are traditionally the primary consideration for door handle design, other factors are being taken into consideration too. Accessibility and control of infections are the main issues that have led to the creation of innovative new handle designs including ones that can be operated with a person's forearm.
Latch
The latch that holds the handle of your door open will wear down as time passes. It is simple to change the latch on your door handle. This will make an enormous difference in the way it opens and closes.
Depending on what type of handle you use the latch can be a separate component or a part of the knob. In either case, you will follow the same procedure to remove and replace. It's simple to take off the old latch, especially if you have doors with a "magic" button. This tiny pressure-slot, found on the side knob is what you need to press in order to pop the latch out of the handle.
If your handle doesn't have this button, you'll have to take off the cover plates placed over the latch plate. These are usually rectangular or circular and can be removed using a screwdriver to pry them off the handle. Some have a small slot in them where you can put your screwdriver into, while others snap off.
Then, remove the machine screws that hold the latch and the plate to the door handle. These are the shorter screws with a sharp tip You will need to keep these in a secure location to reuse them in subsequent steps. After the screws are removed, you can take the latch plate and the mechanism from the hole and set it aside.
Then you can begin to install the new latch. Place the inside of the latch into the hole in the door, and secure it using the provided hardware. Make sure that the square pin that is on the interior of the latch is facing the latching mechanism inside the handle and that it is lined up with the other screw chambers inside the door handle. Then attach the latch's exterior plate using the screws provided.
Strike Plate
One of the most common reasons for replacing the door handle is that it is loose or isn't locking properly. This is typically caused by malfunctioning parts of the latching system, for example a strike plate that is too small or has moved up or down on the doorjamb as time passes. This project allows you replace your old strikeplate with an extended one, which can provide greater security for your door and ensure it stays shut.
Apply a lipstick or other marking material on the latch bolt to check if it is the strike plate. Close the door and try to latch it. If the mark is located below the strike plate's hole, this indicates that your door won't latch because the plate isn't long enough. If the mark is over the strike hole on the plate, it's likely that the strike plate has been moved upwards or downwards on the doorjamb.
Depending on your door You may be able to just screw the new strike plate into the existing one using the screws included with it. You may have to drill holes first and then chisel the wood to ensure a tight fit. If this is the case, you must be careful not to chisel too much or you may cause damage to the strength of your doorjamb.
Installing a brand new box-style strike plate will give the lock a stronger grip on doors and will require more force to open the doors. Typically it requires two long screws that anchor the strike plate to the door frame. You'll need to remove the old strike plate, then drill and chisel the wood to create space for the new one.
This hard-to find strike plate is made of solid brass and has an extremely thick. It's designed to be used on antique rim locks. This kit includes both wood screws as well as machine screws so you can choose the right hardware for your needs. Be aware that wood screws have a pointed point, while machine screws are more blunt.